Skid-steer, mini-excavator, and Bobcat hauling on heavy-duty flatbed. Proper securement, DOT-compliant paperwork, no improvising. Dispatched from our Kew Gardens HQ.
Hollis construction equipment towing is part of our daily run. If your address sits inside 11423, you’re on the dispatch map. When you call, naming a landmark — Hollis Playground is usually enough — cuts the "find you" time in half. Trucks roll from 118-09 83rd Avenue in Kew Gardens, so most Hollis pickups see the truck within about 9 minutes of dispatch. Base fare $299, range $299–$1200 for standard construction equipment towing in the Hollis footprint. All quotes are final before the truck departs — written confirmation available if you need it for an insurance claim. 24/7, consent-only, Queens-wide.
Hollis generates a fairly predictable construction equipment towing pattern across a week of dispatch. The top three we see: hillside ave commercial strip breakdowns; then two-family residential driveway service. On the service side, typical use cases match the Hollis pattern — skid steer (bobcat, cat, john deere compact); mini-excavator; compact track loader. The dispatcher works through a short checklist: what are you driving, where is it now, where does it need to go, is anyone hurt. That’s the information that decides which truck rolls, what equipment it brings, and what the final quote looks like. Answers to those four questions run about thirty seconds and produce a live fare before the truck leaves the yard.
Construction Equipment Towing rigging in Hollis follows strict sequence: document first, secure second, move third. The operator starts by photographing the vehicle in place — plate, VIN if accessible, any existing damage. Only then does the rig go under or around. For the construction equipment towing use cases this service is built for — skid steer (bobcat, cat, john deere compact), mini-excavator, and compact track loader — the hookup method is specific and deviation isn’t improvised at the scene. If a situation looks wrong on arrival — the vehicle class is outside what the dispatched truck can safely handle, or the staging geometry won’t allow a clean rig — the operator stops and calls dispatch for a reassignment. That costs time; it also prevents damaged vehicles and rejected insurance claims. We prefer the honest delay.
Primary corridors our construction equipment towing dispatch runs in Hollis: Hillside Ave, Jamaica Ave, Hollis Ave, and Francis Lewis Blvd. Frequent pickup intersections: Hillside Ave & Francis Lewis Blvd and Hollis Ave & 193rd St. Landmarks we use for dispatch anchoring: Hollis Playground. Hollis zip codes on our construction equipment towing run sheet: 11423. When you call, read off either the street address or whichever landmark sits closest to you — the dispatcher uses whichever gets the truck to your exact position fastest.
Routing to Hollis has three constraints. One: we leave from 118-09 83rd Avenue in Kew Gardens, so the base ETA math starts there — roughly 9 minutes on surface streets under normal conditions. Two: we don’t use parkways, expressways, or state-contract bridges, because our licensing covers commercial non-state-contract work only. Three: the dispatcher reads the live fleet board, so the number you hear is current — not a generic "under 30 minutes" marketing line. The typical approach runs Hillside Ave and Jamaica Ave. Weather and rush-hour traffic move the number; honesty about that is built into every quote. If you need a faster ETA than we can actually deliver, the dispatcher says so on the call — we don’t dispatch a truck we know will arrive late and surprise you.
What sets the final fare on a Hollis construction equipment towing? Four things. Vehicle class — a compact sedan and a half-ton pickup aren’t the same hook-up. Distance — a three-block move inside Hollis isn’t the same as a run out to Nassau or a drop in Manhattan. Access — a curbside pickup takes less time than one that requires reverse staging or off-street rigging. Time of day and day of week — overnight and weekend rates apply to certain categories. Base is $299; most Hollis jobs settle between $299 and $1200. The quote is final before the truck departs — written confirmation available for any caller who wants it in hand.
Full breakdown on the pricing page, or request a written quote.
Pick the right service before you pick the price. In Hollis: if the car can start but something is stopping it from moving safely — tire, battery, fuel, keys — roadside assistance is the answer, faster and cheaper than a tow. If the car won’t move and it’s a standard front-wheel-drive sedan, construction equipment towing or wheel-lift is the call. If the car is AWD, EV, or luxury, flatbed. If the vehicle is heavy — over 10,000 lbs, box truck, commercial — heavy-duty. If there’s been a collision and paperwork has to track, accident recovery with the insurance-documentation workflow. Construction Equipment Towing specifically does not cover full-size excavators or articulated loaders (requires specialized oversize-load permits and escort vehicles). Describe the situation; dispatcher confirms which service.
Your rights, if the Hollis call turns into an accident scene: you choose your own body shop. You choose the tow destination. You sign the consent form, not the officer. You get timestamped photo documentation, written release paperwork, and an itemized invoice. Everything we do is consent-only — we don’t hook, move, or bill without your authorization on scene. Scene clusters in Hollis include Hillside Ave at Francis Lewis Blvd, so operators are familiar with the routing and the paperwork from similar calls. If the insurance carrier has a direct-bill agreement with us, we send them the paperwork; if not, you pay at drop and file the claim with your receipt.
See accident recovery for the full paperwork workflow.
Not every Hollis construction equipment towing call is textbook. Operators regularly handle edge cases that the manual doesn’t cover cleanly: vehicles parked in tight residential driveways with zero turning radius for a flatbed, commercial pickups from loading zones actively being used, winter calls with iced-up mechanisms that won’t disengage, older vehicles with non-standard tow points. Hillside Ave & Francis Lewis Blvd and its cross-street scenes in particular produce awkward geometry. The field judgment call goes: if rigging won’t clear the scene safely, reassign; if the vehicle requires a method outside the dispatched truck’s range, reassign; if the paperwork doesn’t line up, call dispatch before hooking. That’s slower sometimes. It also prevents damaged cars and dropped insurance claims.
Think of the dispatch call as a short script. Dispatcher asks the four questions; you answer them; dispatcher quotes; you confirm or ask for a written version. Done in under three minutes if you have the information ready. For Hollis construction equipment towing calls specifically, the questions get tighter because the dispatcher already knows the territory — they’ll ask "are you on Hillside Ave or off it" and "are you near Hollis Playground" instead of making you describe the whole approach. The quote you hear at the end of that call is the final fare. No "we’ll see at drop," no "plus fuel surcharge" surprises. If you want the quote in writing before the truck leaves, say so — we issue one.
A Hollis construction equipment towing call moves through a fixed sequence. First ring: the dispatcher picks up, logs the number, and asks the vehicle-location-destination-injury questions. That runs about ninety seconds. Second stage: dispatcher reads the live fleet board, picks the closest-appropriate truck, quotes the fare, confirms the caller’s consent verbally. That takes another minute. Third: the assigned operator gets the dispatch ticket on their tablet with the address, landmark, vehicle description, and quoted fare. Operator calls the driver en route with the actual departure time. Fourth: truck arrives, operator verifies identity and signs the written consent form with the owner or authorized operator. Fifth: pre-move photo, rigging, post-rig photo, transit. Sixth: drop, delivery photo, itemized invoice, payment or insurance bill. Every stage has a timestamp. Every stage is documented. When something goes sideways — wrong address, wrong vehicle, wrong destination — we can see exactly where and fix it on the same call instead of making you dispatch a new one.
That’s how construction equipment towing works here. From the Kew Gardens yard to Hollis in about 9 minutes, base fare $299, range $299–$1200, written quote before dispatch, consent-only pickup, itemized invoice at drop. Neighborhoods adjacent to Hollis we also run: Jamaica, Queens Village, and Bellaire. When you’re ready, the number is (347) 539-9726. 24 hours, every day.
When you search for tow truck near me from Hollis, you want somebody who actually knows the neighborhood — the streets where a truck can stage, the blocks where a flatbed tilts clean, the commercial strips where staging works and where it doesn't. Our drivers run Hollis every week, which is why dispatch can quote you a live ETA before the truck rolls instead of giving you a fake minute-promise that falls apart in real traffic.
Zip codes we cover in Hollis: 11423. If you're inside any of those zips and you need construction equipment towing, you're on our run sheet.
Major roads we work in Hollis: Hillside Ave, Jamaica Ave, Hollis Ave, Francis Lewis Blvd. Surface streets only — we do not run state-contracted parkways, expressways, or bridges. Service-road pickups are covered; main-lane recoveries are state-operator jurisdiction.
Landmarks that anchor our Hollis dispatch routing: Hollis Playground. Give the dispatcher one of these when you call from a spot where street address isn't obvious — we'll find you faster.
Base construction equipment towing in Hollis runs $299, with most calls landing between $299 and $1200 depending on distance, vehicle type, and any special equipment needed. Every fare is quoted before the truck rolls — no "we'll figure it out at drop" pricing, no surprises when the vehicle arrives. See full breakdown on the pricing page, or request a written quote before you commit.
Our yard is at 118-09 83rd Avenue in Kew Gardens. Typical travel time from there to Hollis is about 9 minutes, depending on traffic, weather, and the current truck rotation. Dispatch quotes the live ETA when you call rather than posting a generic "15 minutes" promise that breaks in rush hour. We don't run state parkways or expressways — surface-street routing only, which keeps response times honest rather than optimistic.
Yes — 24 hours, 7 days, 365 days a year. Late-night breakdowns on Hillside Ave or weekend construction equipment towing calls from Hollis residential blocks get the same consent-only, quoted- before-dispatch treatment as a weekday-afternoon call. A human answers the phone. Call (347) 539-9726 any hour.
If your address is inside a Hollis zip code (11423) or on any of the surface streets we run — Hillside Ave, Jamaica Ave, Hollis Ave — yes, we serve you. Give the dispatcher your exact address and we'll confirm at the call whether the pickup is standard curbside or needs special staging. Consent-only, always — nothing hooks to your vehicle until you sign on scene.
Yes. Hollis is on our regular run sheet. When drivers, residents, or visitors search for tow truck near me, from a Hollis location, we want to be the truck that shows up. Call us first, quote on the phone, truck rolls, job done — no dispatch marketplaces, no middleman fees, no hidden charges.
Construction Equipment Towing is one piece of what we do in Hollis. If the situation turns out to be different than you first thought — the battery won't jump so you need a tow, the accident was bigger than a roadside fix, the vehicle is heavier than a standard flatbed can carry — we switch you to the right service on the same call. No second dispatch fee. Other Hollis services you can ask for by name:
Hollis sits next to several other Queens neighborhoods we run every day. If you're right on the border of two zip codes, either of these construction equipment towing pages might apply — the dispatcher figures it out when you call.
We are licensed and insured for commercial towing in New York State, operating on a strict consent-only basis — driver-requested or insurance-dispatched only. That means we never hook a vehicle without written authorization on scene from the vehicle's owner or authorized operator. No blocked-driveway non-consent tows, no predatory dispatches, no police-rotation non-consent work. If you don't want the tow, the tow doesn't happen.
New York State law also gives you the right to choose your own body shop after an accident. No tow operator, officer, or insurance adjuster can force you to a specific vendor, network, or preferred shop. Hollis customers frequently pick their own mechanics, family shops, or manufacturer dealers rather than whatever the insurance carrier recommended first. We deliver where you tell us to, every time, with timestamped drop-off photos as proof of delivery. Full detail in the JG Towing FAQ.
One number. Human dispatcher. Quote before the truck rolls. No app, no login, no surprise fees. Dial us for tow truck near me results that actually send a real truck to your Hollis location.
Same process we run across Queens — with the specifics of this neighborhood already factored in.
Make, model, operating weight. We confirm deck capacity and tie-down spec.
Equipment walked onto deck, not winched, unless non-running.
Multiple tie-downs to factory lift points. DOT-compliant.
Pulled from actual tow calls.
Standard flatbed: up to 22,000 lbs operating weight. Heavy-duty tag trailer: up to 40,000 lbs. For anything larger, we coordinate specialized hauling through partners.
Yes — our heavy flatbed drivers hold the appropriate NY commercial license class and maintain medical certifications.
Consent-only, quoted before the truck rolls. 24/7 from our Kew Gardens yard.
